# How To Measure Kitchen Cabinets In Linear Feet

How To Measure Kitchen Cabinets In Linear Feet. When measuring kitchen cabinets, it’s important to measure in linear feet. This is the standard measurement for cabinets, and it will ensure that you get an accurate estimate of the cost of your new cabinets.

To measure in linear feet, simply measure the length and width of each cabinet, and then multiply those numbers together. This will give you the total number of square feet that your cabinets will occupy.

Once you have the total number of square feet, you can then divide that number by 12 to get the number of linear feet. This is the standard way that kitchen cabinets are measured, and it will give you an accurate estimate of the cost of your new cabinets.

## Measure Kitchen Cabinets In Linear Feet

Measuring cabinets can seem like a daunting task. But it doesn’t have to be! The truth is, there are many different ways to measure kitchen cabinets in linear feet. Some of the most popular methods include:

You Measure the height, width, and depth of your cabinet and multiply these measurements together Measure from one corner of your cabinet to the opposite corner Measure from one side of your cabinet to the opposite side

One way that you can measure kitchen cabinets in linear feet is by measuring from one corner of the cabinet to the other. If you follow this method, you would measure from one edge of your kitchen cabinet to the other edge. You would then take your measurement and input it into an online calculator. This calculator would calculate how many linear feet that length equals based on its dimensions (height and width).

For example, if you had a wide but short cabinet that was 10 feet long by 3 feet high, then you would input 10 ft x 3 ft = 30 sq. ft.  You can find out how many square inches this is by dividing 30 sq. ft. by 144 sq ft (1 square foot is 144 sq in.). So for this particular example with our 10ft x 3ft wide but short cabinet, we can figure out that it equals 18 square feet or 1/6th of a standard-size sheet of plywood (144 sq ft).

Read More: How To Choose A Kitchen Island Color

## How To Measure A Cabinet

There are many different ways to measure cabinets. The easiest way is by multiplying the height, width, and depth of the cabinet space. So let’s say you want to measure a cabinet that is 36″ high, 36″ wide, and 18″ deep. First, you would multiply 36x36x18, which equals 5184 inches or 95.4 feet. That means this cabinet measures about 95 linear feet in length.

## What Are The Benefits Of Measuring Kitchen Cabinets In Linear Feet?

Measuring kitchen cabinets in linear feet is a straightforward process. But what are the benefits? Well, measuring in linear feet is easy and it’s accurate. You just need to measure the height, width, and depth of the cabinet and multiply these measurements to get the total linear feet. It’s also a more cost-effective way to measure because you’re not paying for labor.

Just make sure you keep your measurements consistent. If you want to know how many linear feet are in a square foot, there are conversion calculators that can help out with this as well!

## How To Measure Kitchen Cabinets In Square Feet

One way to measure kitchen cabinets in linear feet is to measure the height, width, and depth of each cabinet separately. Multiply these measurements together. Then divide by 12 to find out how many feet of space you have for your cabinets.

Another way to measure kitchen cabinets in linear feet is by multiplying the length and width of an empty cabinet that’s placed on top of a floor plan. Draw lines on your blueprint, then use a ruler or measuring tape to measure the distance between them. This will give you the amount of square footage that the cabinet would take up in your kitchen.

## What Are The Advantages Of Measuring Kitchen Cabinets In Square Feet?

Another way to measure cabinets is by measuring them in square feet. You can also find this answer by looking up the definition of a linear foot. A square foot is equal to the measurement of distance on a plane surface. So it’s easier to measure kitchen cabinets in square feet by taking measurements from all four sides.

There are many advantages of measuring kitchen cabinets in square feet, one being that you don’t have to do any math! If you’re not very good with math, then this can be a huge benefit. It also eliminates mistakes from using more than one unit of measurement when converting from one unit to another. And if you’re designing for a client who uses imperial measurements (inches), it will also eliminate any conversions between different units of measurement.

Take measurements from all four sides, and use the following equation:

Cabinet Width x Cabinet Depth x Cabinet Height = Square Feet

For example: 36″ x 36″ x 24″ = 25 Square Feet

## What Are Linear Feet?

A linear foot is a measurement of distance on a straight line. For example, the height, width, and depth of a kitchen cabinet would all contribute to its linear feet measurement.

Linear feet can be expressed in different ways: as fractional inches (1/2), decimal inches (6.5), or as whole feet (12). Most people will measure their cabinets using the fractional inch method–hopefully one that converts easily to metric!

The formula for calculating linear yards is: ((height x width) x depth). For example, if you have a cabinet that is 36 in tall, 24 in wide, and 18 in deep. The linear feet of this cabinet would be: ((36 x 24) x 18). The answer would be 5760 square inches or 576 cubic inches–or 9 ft 6 in.

The formula for calculating cubic footage is: ((height x width) x depth) divided by 2743.

So if your cabinet has dimensions of 36x24x18in, then it would have cubic footage of 2248 cu.in., or 269 L with the cubic inch conversion.

## Calculate The Length Of One Cabinet

The best way to calculate the linear length of a cabinet is by measuring its height, width, and depth, then multiplying these measurements together.

For example, if a kitchen cabinet has a height of 30 inches and a depth of 20 inches, you would multiply these two measurements together to get 600 inches. The same process can be used for width; if the cabinet has a width of 18 inches, you would multiply this measurement by that of the depth to get 3600 inches.

Once you have calculated all three dimensions in linear feet, you will need to convert them into feet and inches. To do so, divide each one by 12 which will give you their equivalent measurements in feet and inches. For our hypothetical cabinet example from above: 30/12 = 2 ft., 20/12 = 1 ft., 18/12 = 1 ft., 600/12 = 50 in., 3600/12 = 300 in.

In order to measure kitchen cabinets using linear feet, it’s important to keep these two things in mind. Measurements should be taken on an even wall Measurements should be taken at an average height

## What Is A Linear Foot

Linear feet are used for measuring items such as carpets, rugs, cabinets, and more. A linear foot measures the length of a straight line from one end to the other. This could be from one end of an item to the other, or it could be from one side of an item to the other. It can also refer to measuring the distance from an object’s top edge to its bottom edge.

A quick internet search will show that there are many different ways to measure kitchen cabinets in linear feet. But which one is most accurate? The answer lies in what is considered a linear foot. A linear foot refers to a measurement taken on a straight line. So it makes sense that you would need to measure the height, width, and depth of the cabinet in order to accurately find out how many linear feet it takes up. If you don’t know how long your cabinet is. You can take measurements using a ruler or yardstick and divide by 12 inches (or 3 feet).

If you’re planning on upgrading your kitchen with new cabinetry. If but want some more insight into all aspects of design, be sure to check out our Kitchen Design Guide!

## Conclusion

• To measure kitchen cabinets in linear feet, first, measure the longest wall of your kitchen that the cabinets will be placed on.
• If the longest wall is 12 feet, then that is the number of linear feet that one row of cabinets will take up.
• Keep in mind that this measurement only goes for one wall, so if you have two rows of cabinets, multiply the linear feet number by two.
• When measuring kitchen cabinets in square feet. Use the total length of all walls and divide by the total number of cabinets to find the total square footage needed.
• Generally, when measuring kitchen cabinets in square feet. You will end up with a larger number than when you measure them in linear feet. The square footage measurement is generally more accurate because it takes into consideration the space between your walls and cabinets.
• In a square foot measurement, one linear foot is equal to 1 square foot.
• To calculate the length of one cabinet, subtract the total length of your kitchen from 12 feet (the one row). So if your kitchen is 20 feet long, then each row would have 10 linear feet of space for cabinets.
• A linear foot is calculated by multiplying the
Scroll to Top