How To Clean Rear View Mirror

How To Clean Rear View Mirror

If you’re like most drivers, you probably use your rearview mirror to check your surroundings while driving. But over time, dirt and grime can build up on the reflector and in the surrounding area. If left unchecked, this dirt and gunk can eventually cause reflections that make it difficult to see behind you. 

What are rear view mirrors?

Rear view mirrors are devices that help drivers see behind them. They may be mounted to the rearview reflector housing, or they may be attached to the inside of the vehicle’s window. Rear scene mirrors can either have a traditional reflector shape or an electronic display.

Why are they important?

Rear view mirrors are important because they allow drivers to see behind them while driving. Drivers who use rear scene mirrors are less likely to get into accidents. Rear view mirrors also protect other drivers by letting them know when a vehicle is coming from behind.

What do you need to clean your mirror?

When it comes to cleaning your reflector, you will need a few items. 

-A clean cloth or sponge.

-Windex or a similar cleaner.

-A bucket or large container for collecting the water.

-A second cloth for wiping down the reflector after cleaning.

Method 1: Use a microfiber cloth and warm water

Many people do not realize that there is a simple way to keep their rear scene mirror clean. All you need is a microfiber cloth and warm water. Simply wet the microfiber cloth, and then use it to wipe down the reflector. Make sure to go around the entire reflector, as dirt and dust will often accumulate in less visible areas. Once you’ve cleaned the entire reflector, dry it off with a paper towel. This simple task will help keep your rear scene reflector looking clean and free of debris.

Method 2: Use a glass cleaner and warm water

Cleaning the rear scene mirror can be a hassle, but using a glass cleaner and warm water can make the job much easier. Simply wet the cloth and wring it out. Rub the cleaner onto the reflector, working in a circular pattern. Then use the cloth to wipe off the reflector. Finally, rinse off the cloth and dry it off.

Method 3: Use a dashboard cleaner and warm water

If you frequently drive in dusty or dirty conditions, it’s important to keep your car clean. One way to do this is to use a dashboard cleaner and warm water. This method will clean the inside of your rearview mirror and make it easier to see behind you.

How to clean rear view mirror: Step 1: Remove the mirror

If you’re like most drivers, you probably check your reflector at least twice every day. But is it really necessary to keep that reflective surface clean? Not according to some safety experts. “Most rear-view mirrors are treated with a protective film that’s designed to resist scratches and dirt, but over time the film can become pitted and cracked,” says Dave Weigel, a spokesperson for “And when that happens, it becomes much harder for the driver to see behind them.”

To remove the speculum without damaging it, use a soft cloth with mild soap and water. Be sure to rinse off the soap before replacing the speculum cover.

Step 2: Clean the mirror surface with a cloth or a vacuum cleaner

When you’re driving and you notice a dirt or grease spot on your rear scene speculum, it’s important to clean it right away. There are a few ways to clean the speculum surface: with a cloth, using a vacuum cleaner, or using a piece of glass cleaner. 

To clean the speculum with a cloth, first use a clean dry cloth to gently wipe the speculum surface. Make sure to wipe in an upward and outward motion. Wiping in one direction will only create dust and dirt particles, which will be difficult to remove. 

If the dirt or grease spot is larger than can be cleaned with a cloth, use a vacuum cleaner.Attach the hose attachment to the vacuum cleaner and turn it on to the lowest power setting. Move the vacuum cleaner slowly across the mirror surface. Be careful not to scratch or damage the mirror surface.

Step 3: Polish the mirror with a polishing cloth

Are you tired of your dirty and scratched speculum? Polish the mirror with a polishing cloth to restore its original shine. This simple step will help improve your visibility while driving, and keep your car clean and looking new.

Rear view mirror cleaning tips: How to keep your mirror shining

Looking into your mirror can be somewhat depressing. The reflection you see is likely not what you want to see, and there’s nothing you can do about it. But there are ways to keep your mirror shining and looking its best. Here are a few tips: 

-Wipe down the surface every day or two with a dry cloth to remove any dust or smudges.

-Keep the glass clean by using a soft cloth to wipe off any fingerprints or streaks.

-Avoid using harsh chemicals or solvents on the speculum because they can damage it over time. 

-Install a temporary adhesive strip that helps reflect sunlight and prevents reflections from appearing in mirrors while painting or taking pictures.

How to remove stubborn dirt and debris

If you have a stubborn dirt or debris problem on your car, there are a few things you can do to try and get it removed. 

1. Use a vacuum cleaner. This is the most common way to remove dirt and debris from surfaces. 

2. Use a plunger. This method is used to remove objects that are stuck in tight spaces or below the surface of the object being cleaned. 

3. Use boiling water. Boil water and pour it over the area that needs cleaning, then use a scrub brush to clean the area. 

4. Use vinegar and water mixture as a degreaser. Pour 1 cup of vinegar into 1 gallon of cold water, mix well, and use this mixture to clean surfaces with stubborn dirt or debris on them.


In conclusion,clean the speculum with a mild soap and water solution. Be sure to dry it off completely before using it again. Finally, use a cloth or microfiber towel to clean the surrounding area where the speculum meets the wall.

About The Author

Scroll to Top